14-22
Sampling and Sample Editing
Editing Samples
The Truncate function will automatically reset the Start (S) and End (E) points of the sample.
This can be quicker than trimming the sample manually on the TRIM page.
Use the Start and End parameters to select a specific sample range. Set the Thresh parameter
from -96 to 0dB to set the noise floor. When you press the Go soft button, the K2661 will search
inward from the start and end points you set, until it finds the first sample that exceeds the noise
floor. Everything outside the range will be left out. You’ll want to experiment with different
thresholds to find the noise floor that suits each sample you truncate. If the new End point is
inside the current loop point, the loop will be disabled.
When you press the Go soft button, you’ll be prompted “Keep this change?” Unlike the other
DSP functions, answering Yes does not bring up the Save dialog. It registers the new Start and
End positions as the Start (S) and End (E) points (as set on the TRIM or LOOP page). In fact, you
can go to either of these pages to readjust the S and E points if you want to include more of the
sample. To save the new S and E points, press the Done soft button (if necessary) to return to the
SampleMode page, then press either the Save soft button, or Exit.
3 Volume Adjust
Use this function for a uniform cut or boost in the amplitude of the selected sample segment.
This function will clip samples if you adjust the volume too high. This won’t hurt the K2661, and
you may find it useful in some applications. In any case, you’ll need to choose your start and
end points carefully, if you want to avoid abrupt changes in volume.
When you’ve selected the range to be adjusted, select the VolAdjust parameter with the cursor
buttons, and use the Alpha Wheel to adjust the volume of the selected range. You can cut/boost
the volume from -96 to 96 dB.
4 Clear
F:VolAdjust||Start:1.019||||End:5.126|||
VolAdj:0dB||||||||||||||||||||||||||||||
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
-6dB>|||||||||||||||||||||||||||||||||||
****************************************
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|Cut||||Copy||Paste||Samp2|||Go||||Done|
F:Clear||||||Start:0.000||||End:6.000|||
||||||||||||||||||||||||||||||||||||||||
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
-6dB>|||||||||||||||||||||||||||||||||||
****************************************
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|Cut||||Copy||Paste||Samp2|||Go||||Done|
To Next Page
Loading...
