Kyocera FS-C8500DN - Page 109

2KA
1-3-73
U246
Method: [Booklet Fold]
1. Select the item to set.
Setting: [Width U HP/Width L HP]
1. Change the setting value using the Left/Right Select keys.
2. Press the OK key. The value is set.
Setting: [Staple Pos. S/Staple Pos. M/Staple Pos. L]
1. Change the setting value using the Left/Right Select keys.
When staples are placed too far right (sample 1), decrease the preset value. When staples are placed
too far left (sample 2), increase the preset value.
Reference value: within  2 mm
Figure 1-3-11
2. Press the OK key. The value is set.
Maintenance
item No.
Description
Display Description
Width U HP Adjustment of upper side registration home position
Width L HP Adjustment of lower side registration home position
Staple Pos. S Adjustment of booklet stapling position for A4/Letter size
Staple Pos. M Adjustment of booklet stapling position for B4/Legal size
Staple Pos. L Adjustment of booklet stapling position for A3/Ledger size
Saddle Pos. S Adjustment of center folding position for A4/Letter size
Saddle Pos. M Adjustment of center folding position for B4/Legal size
Saddle Pos. L Adjustment of center folding position for A3/Ledger size
Description
Setting
range
Initial
setting
Change in
value per step
Adjustment of upper side registration home position -20 to 20 0 0.1 mm
Adjustment of lower side registration home position -46 to 46 0 0.1 mm
Description
Setting
range
Initial
setting
Change in
value per step
Adjustment of booklet stapling position for A4/Letter size -10 to 10 0 0.55 mm
Adjustment of booklet stapling position for B4/Legal size -10 to 10 0 0.55 mm
Adjustment of booklet stapling position for A3/Ledger size -10 to 10 0 0.55 mm
Sample 2
Sample 1
2 mm2 mm