Kyocera FS-C8500DN - Page 295

2KA
2-2-7
19. Cleaning motor MCY (CLM-MCY) ............... Drives the cleaning rollers M,C,Y.
20. Developing motor K (DEVM-K) .................... Drives the developing unit K.
21. Cleaning motor K (CLM-K)........................... Drives the cleaning roller K.
22. Transfer motor (TRM) .................................. Drives the transfer belt.
23. Color release motor (CRM).......................... Drives separation of secondary transfer rollers M, C, and Y.
24. Fuser motor (FUM) ...................................... Drives the fuser section.
25. Eject motor (EM).......................................... Drives the eject section.
26. Feedshift motor (FSM) ................................. Drives the feedshift section.
27. Duplex motor (DUM) .................................... Drives duplex section.
28. Front fan motor (FRFM) ............................... Cools the machine front side.
29. Container fan motor (CFM).......................... Cools the toner container section.
30. Developing fan motor 1 (DEVFM1).............. Cools the developing section.
31. Developing fan motor 2 (DEVFM2).............. Cools the developing section.
32. Developing fan motor 3 (DEVFM3).............. Cools the developing section.
33. Developing fan motor 4 (DEVFM4).............. Cools the toner container section.
34. Developing fan motor 5 (DEVFM5).............. Cools the transfer belt section.
35. Fuser fan motor (FUFM) .............................. Cools the fuser section.
36. Eject fan motor (EFM).................................. Cools the eject section.
37. Transfer fan motor 1 (TRFM1) ..................... Cools the transfer belt.
38. Transfer fan motor 2 (TRFM2) ..................... Stabilizes the paper conveying in the transfer section.
39. Transfer fan motor 3 (TRFM3) ..................... Stabilizes the paper conveying in the transfer section.
40. Transfer fan motor 4 (TRFM4) ..................... Cools the transfer belt.
41. LSU fan motor (LSUFM) .............................. Cools the LSU.
42. Power source fan motor 1 (PSFM1) ............ Cools the high voltage PWB and power source PWB.
43. Power source fan motor 2 (PSFM2) ............ Cools the high voltage PWB and power source PWB.
44. Loop fan motor (LFM) .................................. Cools the duplex section.
45. Main fan motor (MFM) ................................. Cools the main PWB.