Kyocera TASKalfa 3510i - Developing Section; Detaching and Refitting the Developing Unit

2NL/2P8
1-5-13
1-5-4 Developing section
(1) Detaching and refitting the developing unit
Procedures
1. Open the front cover. (See page 1-5-3)
2. Release the lock lever and remove the
waste toner box.
Figure 1-5-21
3. Release the toner container lever and
then remove the toner container.
Figure 1-5-22
Lock lever
Waste toner box
Toner container lever
Toner container