205
11. Appendix
Connecting the Machine to a Telephone
Line and Telephone
Connecting the Telephone Line
To connect the machine to a telephone line, use a snap-in modular type connec-
tor.
CAUTION:
ATTENTION:
Important
❒ By law in the United States, you must program your phone number identifi-
cation (your fax number) into your machine before you can connect the public
phone system. See p.83 “Initial Settings and Adjustments”, Facsimile Reference
<Basic Features>.
❒ Make sure the connector is the correct type before you start.
❖ Where to connect the machine
1. External telephone connector
2. G3 interface unit connector
3. Extra G3 interface unit connector
• To reduce the risk of fire, use only No. 26 AWG or larger telecommunica-
tion line cord.
• Pour réduire le risque d'incendie, utiliser uniquement des conducteurs de
télécommunications 26 AWG ou de section supérieure.
AJC013S
RussianC4-EN_Combine-F_FM.book Page 205 Tuesday, April 5, 2005 8:22 PM
To Next Page
Loading...
