Specifications
211
11
❖ IP-Fax Transmission and Reception
Network LAN: Local Area Network
Ethernet/10base-T, 100base-TX, IEEE1394 (IP over 1394),
IEEE802.11b (wireless LAN)
Scan line density 8 × 3.85 mm·200 × 100 dpi (Standard character),
8 × 7.7 mm, 200 × 200 dpi (Detail character),
8 × 15.4 mm (Fine character: optional expansion memory re-
quired),
16 × 15.4 mm, 400 × 400 dpi (Super Fine character: optional ex-
pansion memory required)
Original size Maximum A3 or 11" × 17" (DLT)
Maximum scanning size
Standard: A3, 297 mm
×
432 mm, Irregular: 297 mm
×
1200 mm
Transmission protocol Recommended: T.38 Annex, TCP, UDP/IP communication,
SIP (RFC 3261 compliant), H.323 v2
Compatible machines IP-Fax compatible machines
IP-Fax transmission function Specify an IP address and send faxes to an IP-Fax compatible
fax through a network.
Also capable of sending faxes from a G3 fax connected to a
telephone line via a VoIP gateway.
IP-Fax reception function Receive faxes sent from an IP-Fax compatible fax through a
network.
Also capable of receiving faxes from a G3 fax connected to a
telephone line via a VoIP gateway.
RussianC4-EN_Combine-F_FM.book Page 211 Tuesday, April 5, 2005 8:22 PM
To Next Page
Loading...
