Laser 128 - Page 22

GETTING FAMILIAR WITH THE LASER 128/128EX
@ The SERIAL / PARALLEL PRINTER SWITCH
selects either the serial printer or the parallel
printer connected to the computer as the printing
device.
G) The MONO / COLOR SWITCH is for
enabling/ disabling color video outputs. If you are
using a color monitor or TV, thro w the switch to
the "COLOR" position in order to display graphics
in color. If instead you are using a monochrome
monitor or black-and-white ~V set, we suggest you
set the switch to the "MONO" position in order to
h ave a clear graphics display .
© The DRIVE INDICATOR is lit up whenever the
built-in disk drive is working. As a general rule,
you should NOT insert or remove a diskette when
a disk drive is turned on.
@ The CAPS LOCK INDICATOR is lit up whenever
the CAPS LOCK function of the keyboard is
turned on. Pressing the CAPS LOCK key turns the
CAPS LOCK function on and off alternately.
When turned on, any letter typed on the keyboard
will be displayed as a capital letter.
@ The POWER INDICATOR is lit up whenever the
comp uter is tu rned on. It provides an easy way to
check whether the power supply is working
properly or not.
CZ) The KEYBOARD is, of course, for entering
information into the computer. It contains 90 keys,
including the numeric keypad on the right.
I-9