84
LAUNCH PAD V
User's Manual
frames, and [Stop] to stop recording. While recording, the recorded
pages will be shown on the screen.
<4> Load waveform for playback
The Import function enables you to import the stored waveform fi le for
playback and review. During replaying, the Scopebox stops collecting
data automatically.
Tap
, then select [Waveform replay] from the pop-up menu to enter:
Select the fi le fi rst, and then tap to open the waveform fi le. Tap
to starting the playback and tap
to stop it.
To delete the waveform fi le, tap .
Tap
to return to the previous screen.
7.3.4.6 Expert reference
<1> Expert Reference
By default, it appears blank. As a matter of fact, Expert reference
database is generated by doing the following:
1. Open and edit a snapshot;
2. Select “Joint the expert database” (refer to the following illustration),
and then tap
to save the waveform being displayed on the
screen as REF.
Tap and then [Expert Reference] to enter, the following operation
can be done:
: To load and recall the selected fi le.
: To delete the selected fi le.
: To edit the selected fi le.
<2> Base Reference
To Next Page
Loading...
Need help?
General
