PQIII Debugger | 53
©
1989-2021 Lauterbach GmbH
TrOnchip.VarCONVert Adjust HLL breakpoint in on-chip resource
Format: TrOnchip.VarCONVert [ON | OFF]
ON (default) After a data address breakpoint is set to an HLL variable all on-chip
breakpoints are spent. As soon as a new data address breakpoint is set
the data address breakpoint to the HLL variable is converted to a single
data address breakpoint. Please be aware, that the breakpoint is still
listed as a range breakpoint in the Break.List window. Use the Data.View
command to verify the set data address breakpoints.
OFF An error message is displayed when the user wants to set a new data
address breakpoint after all on-chip breakpoints are spent by a data address
breakpoint to an HLL variable.
TrOnchip.VarCONVert ON
Var.Break.Set flags
Var.Break.Set ast
Data.View flags
Data.View ast
To Next Page
Loading...
