LCR Pro1 - Timeout, Speed, and Calibration

12 User Manual - LCR Pro1/Pro1 Plus - ver 1.06
Figure 2-7: Sound Menu
Timeout Menu
Timeout menu is used to select the timer to powers off the meter automatically if neither a measurement is
performed nor any button is clicked. The default setting is 1 minute and the following timeout values can be
selected:
• 30sec
• 1min
• 2min
• 4min
• Exit: Return to the measurement display.
Figure 2-8: Timeout Menu
Test Speed Menu
Test speed menu is used to select how fast the meter measures the component under test. The default setting is
1.0 second per measurement and the following test speeds can be selected:
• 0.5sec
• 1.0sec
• 2.0sec
• Exit: Return to the measurement display.
Figure 2-9: Test Speed Menu
NOTE
The faster the test speed, the shorter the battery life as the meter works in active mode more often to perform
more measurements.