Need help?Do you have a question about the LCR Pro1 and is the answer not in the manual?
General| Type | LCR Meter |
|---|---|
| Basic Accuracy | 0.1% |
| Interfaces | USB |
| Measurement Parameters | L, C, R, Z, D, Q |
| DC Bias Voltage | 0 V |
Specific warnings for meter usage, handling, and environmental conditions.
Explains how to perform a hardware reset to factory settings.
Lists and describes configuration for LCRZ, secondary parameters, sorting, and recording modes.
Covers setting test frequency, voltage, circuit mode, phase angle, continuity, and sorting parameters.
Describes LCRZ measurement modes (R, L, C, Z) and the automatic component identification.
Details how to set up resistance, inductance, capacitance, and impedance measurements.
Provides detailed accuracy specs for resistance measurements at different frequencies and voltages.
Provides detailed accuracy specs for inductance measurements at different frequencies and voltages.
Provides detailed accuracy specs for capacitance measurements at different frequencies and voltages.
To Next Page
