ELD2-RS70** User Manual
Introduction
Thanks for purchasing Leadshine ELD2-series low-voltage AC servo drivers, this instruction
manual provides knowledge and attention for using this driver.
Contact tech@leadshine.com for more technical service .
Incorrect operation may cause unexpected accident, please read this manual carefully
before using product.
We reserve the right to modify equipment and documentation without prior notice.
We won’t undertake any responsibility with customer’s any modification of product, and the
warranty of product will be cancel at the same time.
Be attention to the following warning symbol:
Warning indicates that the error operation could result in loss of life or serious injury.
Caution indicates that the error operation could result in operator injured, also make
equipment damaged.
Attention indicates that the error use may damage product and equipment.
Safety precautions
Warning
⚫ The design and manufacture of product doesn’t use in mechanic and system which have a threat to
operator.
⚫ The safety protection must be provided in design and manufacture when using this product to
prevent incorrect operation or abnormal accident.
Acceptance
Caution
⚫ The product which is damaged or have fault is forbidden to use.
Transportation
Caution
⚫ The storage and transportation must be in normal condition.
⚫ Don’t stack too high, prevent falling.
⚫ The product should be packaged properly in transportation,
⚫ Don’t hold the product by the cable, motor shaft or encoder while transporting it.
⚫ The product can’t undertake external force and shock.
Installation
Caution
Servo Driver and Servo Motor:
⚫ Don’t install them on inflammable substance or near it to preventing fire hazard.
⚫ Avoid vibration, prohibit direct impact.
To Next Page
Loading...