Leadshine ELD2-RS70 Series - Page 60

60
ELD2-RS70** User Manual
Table 6.14 Related Parameter Setup of Command Pulse Prohibit
No
Parameter
Name
Setup method
1
Pr5.18
Command pulse prohibit input invalid setup
Please refer to chapter 4
2
Pr5.19
Command pulse prohibit input read setup
And the input port should be assigned for “INH”, for details of these parameters, refer to Pr4.02 –
Pr4.09.
8. Other setup for SI/SO function
For details of SI input function, refer to Pr4.02 – Pr4.09.
For details of SO output function, refer to Pr4.10 – Pr4.15.