5.4008.8573.0 B
Troubleshooting 8-5
Table 8 Troubleshooting table machine (cont'd.)
Symptom
Possible cause Action
Clean the black plate on the
machine (see Clean the Pad and
the black Plate on the Machine
on page 6-3).
The spring in the charging
station is broken.
Contact your local Lely service
provider.
Check the LED lights of the
charging station.
See 'Trouble shooting table
charging station' below.
I can not control the machine
with my smartphone.
Bluetooth and or Location on
the smartphone is switched off.
Switch on Bluetooth and
Location on your smartphone
(see user manual of your
smartphone).
Your smartphone is not paired
to the machine.
Pair your smartphone with the
machine (see Pair your
Smartphone with the Discovery
on page 5-1).
The Lely Control Plus app is not
connected to the machine.
Connect the Lely Control Plus
app to the machine.
The Lely Control Plus app is
connected, but to the wrong
machine.
Connect the Lely Control Plus
app to the right machine.
The machine is out of range
from the smartphone.
Bring your phone closer to the
machine.
Other unknown cause. Restart your smartphone and
restart the machine by switching
the machine off and on.
I want to bring back the machine
to the charger but manual
control is not working.
The battery was emptied to
30%, the machine switched off
automatically
Open the cover, switch On the
battery (push the battery button
twice) and switch On the
machine with the button on the
VIOB. Manually drive and
connect the machine to the
charger.
The battery is completely
empty.
Charge the depleted battery
according to the procedure (see
Charge a Completely Depleted
Battery on page 5-21).
The machine does not stop at a
bump point.
The route is not programmed
correctly.
Contact your local Lely service
provider to have the route
reprogrammed.
The map of the barn is not
programmed correctly.
Contact your local Lely service
provider to have the map
reprogrammed.
in novators in agriculture
To Next Page
Loading...
Need help?
General
