•Ifyouhaveinstalledasecondmicroprocessorandyouareremovingtheheatsinkandfanassembly
formicroprocessor2,disconnecttheheatsinkandfanassemblycablefromthesystemfan1
connectoronthesystemboard.See“Locatingpartsonthesystemboard”onpage33.Then,remove
thefourscrews
1thatsecuretheheatsinkandfanassembly.
Figure64.Screwsthatsecuretheheatsinkandfanassemblyformicroprocessor2
6.Lifttheheatsinkandfanassemblyoffthesystemboard.
Notes:
a.Youmighthavetogentlytwisttheheatsinkandfanassemblytofreeitfromthemicroprocessor.
b.Whenhandlingtheheatsinkandfanassembly,donottouchthethermalgrease1onthebottomofit.
Figure65.Heatsinkandfanassembly
7.Ifyouareinstructedtoreturntheremovedheatsinkandfanassemblytothemanufacturer,followall
packaginginstructionsanduseanypackagingmaterialsthataresuppliedtoyouforshipping.
98ThinkServerTD230HardwareMaintenanceManual
To Next Page
Loading...
