Table 7. System-board connectors (continued)
15 System power connector 31 PCIe 4.0 x16 slot 1 to 2
16 SATA connector 6 32 PCIe 3.0 x8 slot 3
System-board jumpers and buttons
The following illustration indicates the location of the jumpers and buttons on the server.
Note: If there is a clear protective sticker on the top of the switch blocks, you must remove and discard it to
access the switches.
Figure 16. System-board jumpers and buttons
The following table describes the jumpers and buttons on the system board.
Chapter 2. Server components 21
To Next Page
Loading...
