Lenovo ThinkSystem SR250 V2 - Install the VGA Cable (3.5-Inch Drive Model)

Figure 124. VGA cover removal
a. Use a tool to press both clips.
b.
Pull the cover of the VGA cable out.
Step 3. Remove the VGA cable.
Figure 125. VGA cable removal
a.
Remove the screws that secure the VGA cable.
b.
Pull out the VGA cable out of the server.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the VGA cable (3.5-inch drive model)
Use this information to install the VGA cable for the 3.5-inch drive model.
138
ThinkSystem SR250 V2 Maintenance Manual