x16 PCIe riser assembly
Figure 24. x16 PCIe riser assembly
Table 9. x16 PCIe riser assembly
1 Slot 2, PCIe Gen4 x16 in x16 slot, full height
x8/x8 Butterfly riser assembly
Figure 25. x8/x8 Butterfly riser assembly
Table 10. x8/x8 Butterfly riser assembly
1 Slot 1, PCIe Gen4 x8 in x8 slot, half-length (open-end) 2 Slot 2, PCIe Gen4 x8 in x16 slot, full-height
Parts list
Use the parts list to identify each of the components that are available for your server.
For more information about ordering the parts shown in the
Figure 26 “Server components - 2.5-inch drive
model” on page 27
or Figure 27 “Server components - 3.5-inch drive model” on page 30:
http://datacentersupport.lenovo.com/us/en/products/servers/thinksystem/sr250/7Y51/parts
Note: Depending on the model, your server might look slightly different from the illustration.
The parts listed in the following table are identified as one of the following:
Chapter 2. Server components 25
To Next Page
Loading...
