Lenovo ThinkSystem SR250 V2 - Four 3.5-Inch Hot-Swap Drive Cable Routing

Four SATA drives (Hardware RAID/HBA)
Figure 36. Four SATA drives (Hardware RAID/HBA)
From To
1 Backplate: Power cable
System board: Backplane power connector
2 Backplate: SATA cable 8i: C0
Four 3.5-inch hot-swap drive cable routing
Use this section to understand how to route cables for four 3.5-inch hot-swap drive model.
Notes:
• Connections between connectors;
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
• When routing the cables, ensure that all cables are routed appropriately through the cable guides and
cable clips.
44
ThinkSystem SR250 V2 Maintenance Manual