Lenovo ThinkSystem SR250 V2 - Install the Front Operator Panel (3.5-Inch Drive Model)

After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front operator panel (3.5-inch drive model)
Use this information to install the front operator panel (3.5-inch drive model).
About this task
Attention: Read the following section(s) to ensure that you work safely.
• “Safety” on page iii
• “Installation Guidelines” on page 51
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
BPZOAqQMD37KjuxaVHVBkH
.
Procedure
Step 1. Slide the front operator panel and cables into the slot on the front server.
Figure 73. Front operator panel (3.5-inch drive model) installation
Step 2. Install the two screws that secure the front operator panel.
Chapter 4. Hardware replacement procedures 85