Lenovo ThinkSystem SR250 V2 - Eight 2.5-Inch Hot-Swap Drive Cable Routing

Four SATA/SAS drives (Hardware RAID/HBA)
From To
1 Backplane: Power connector
System board: Backplane power connector
2 Backplane: SATA signal connector 8i: C0
Figure 38. Four SATA/SAS drives (Hardware RAID/HBA)
Eight 2.5-inch hot-swap drive cable routing
Use this section to understand how to route cables for eight 2.5-inch hot-swap drive model.
Notes:
• Connections between connectors;
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
• When routing the cables, ensure that all cables are routed appropriately through the cable guides and
cable clips.
46 ThinkSystem SR250 V2 Maintenance Manual