Step 5. Remove the two screws on the power distribution board.
Figure 96. Power distribution board screw removal
Step 6. Carefully slide the power distribution board backwards and remove it out of the server.
Figure 97. Power distribution board removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the power distribution board
Use this information to install the power distribution board.
About this task
Attention: Read the following section(s) to ensure that you work safely.
•
“Safety” on page iii
• “Installation Guidelines” on page 51
Chapter 4. Hardware replacement procedures 111
To Next Page
Loading...
