Lenovo ThinkSystem SR250 V2 - Hot-Swap Power Supply Unit Cable Routing

Figure 31. Fixed power supply unit cable routing
1 System power connector
2 Processor power connector
Hot-swap power supply unit cable routing
Use the section to understand the internal routing and connectors for the hot-swap power supply units.
Notes:
• Connections between connectors;
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
• When routing the cables, ensure that all cables are routed appropriately through the cable guides and
cable clips.
Chapter 3. Internal cable routing 39