Lenovo ThinkSystem SR250 V2 - Ten 2.5-Inch Hot-Swap Drive Cable Routing

Eight SATA/SAS drives (Hardware RAID/HBA)
Figure 40. Eight SATA/SAS drives (Hardware RAID/HBA)
From To
1 Backplane: Power connector System board: Backplane power connector
2 Backplane: SATA signal connector 1 8i: C0
3 Backplane: SATA signal connector 2 8i: C1
Ten 2.5-inch hot-swap drive cable routing
Use this section to understand how to route cables for ten 2.5-inch hot-swap drive model.
Notes:
• Connections between connectors;
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
• When routing the cables, ensure that all cables are routed appropriately through the cable guides and
cable clips.
48
ThinkSystem SR250 V2 Maintenance Manual