Lenovo ThinkSystem SR250 V2 - Page 39

Table 12. Parts listing - 3.5-inch drive model
Index Description
Tier 1 CRU Tier 2 CRU
FRU
Consuma-
ble and
Structural
part
For more information about ordering the parts shown in
Figure 27 “Server components - 3.5-inch drive model” on
page 30
:
http://datacentersupport.lenovo.com/us/en/products/servers/thinksystem/sr250/7Y51/parts
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner
before purchasing any new parts.
1
Top cover
√
2
PCIe riser assembly
√
3
RAID adapter
√
4
M.2 retainer clip (Support is planned for 4Q/2022)
√
5
M.2 boot adapter (Support is planned for 4Q/
2022)
√
6
PCIe adapter for M.2 boot adapter (Support is
planned for 4Q/2022)
√
7
Air baffle
√
8
Fan
√
9
CMOS battery (CR2032)
√
10
System board
√
11
Power distribution board cover
√
12
Fixed power supply unit
√
13
Redundant power supply unit
√
14
Chassis for redundant power supply
√
15
Rack latches
√
16
Security bezel
√
17
Front operator panel
√
18
VGA cable
√
19
3.5-inch hot-swap drive
√
20
3.5-inch simple-swap drive
√
21
2.5-inch simple-swap drive with 3.5-inch drive
tray
√
22
Drive filler
√
23
Chassis for fixed power supply
√
24
Power distribution board
√
25
Flash power module
√
Chapter 2. Server components 31