Lenovo x3250 m6 - Page 108

Step7.InstallthePCIriser-cardassembly.See“InstallingthePCIriser-cardassembly”onpage94.
InstallingthePCIriser-cardassembly
IfyouhaveremovedthePCIriser-cardassembly,youneedtoinstallitthebeforeturningontheserver.To
installthePCIriser-cardassembly,dothefollowing:
Step1.InstalltheappropriateadaptersontothePCIriser-cardassembly.See“Installinganadapter”on
page111.
Step2.ReconnectanyadaptercablesthatyoudisconnectedwhenyouremovedthePCIriser-card
assembly.
Step3.CarefullyalignthePCIriser-cardassemblywiththeguidesontherearoftheserverandwiththe
PCIriser-cardconnectoronthesystemboard.Then,placeyourfingersonthebluetabsandpress
downonthePCIriser-cardassembly.Makesurethattheriser-cardassemblyisfullyseatedin
theconnectoronthesystemboard.
Figure23.PCIriser-cardassemblyinstallation
Step4.Completethepartsreplacement.See“Completingthepartsreplacement”onpage172.
Removingtheflashpowermoduleholder
Note:Theflashpowermoduleholderissupportedonthe2.5-inch-driveservermodelsonly.
Toremovetheflashpowermoduleholder,dothefollowing:
Step1.Turnofftheserver.Then,disconnectallexternalcablesandremoveallperipheraldevices.
Step2.Removetheservercover.See“Removingtheservercover”onpage88.
Step3.Removetheflashpowermodule.See“RemovingaRAIDadapterbatteryorflashpowermodule”
onpage114
.
94LenovoSystemx3250M6InstallationandServiceGuide