Figure129.Riser-cardassemblyinstallation-full-height,full-lengthadapters
Step12.Performanyconfigurationtasksthatarerequiredfortheadapter.
Step13.Reinstallthetopcover(see“Replacingthetopcover”onpage144).
Step14.Slidetheserverintotherack.
Step15.Reconnectthepowercordsandanycablesthatyouremoved.
Step16.Turnontheperipheraldevicesandtheserver.
ReplacinganadapterinPCIexpansionslot4orslot5
UsethissectiontoreplaceanadapterinPCIexpansionslot4orslot5.
Toreplaceanadapter,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page289.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables.
Step3.Removetheservertopcover(see“Removingthetopcover”onpage143).
Step4.1Rotatethebrackettotheopenposition.
Step5.Slidetheexpansion-slotcoveroutoftheserver.
Step6.2AligntheadapterwiththePCIconnectoronthesystemboardandpresstheadapterfirmly
intothePCIconnectoronthesystemboard.
Chapter5.Removingandreplacingcomponents195