Figure130.Adapterinstallation
Step7.Rotatetheretentionbrackettothecloseposition.
Step8.Connectanyrequiredcablestotheadapter.
Attention:
•Whenyouroutecables,donotblockanyconnectorsortheventilatedspacearoundanyof
thefans.
•Makesurethatcablesarenotroutedontopofcomponentsthatareundertheriser-card
assembly.
•Makesurethatcablesarenotpinchedbytheservercomponents.
Step9.Performanyconfigurationtasksthatarerequiredfortheadapter.
Step10.Reinstallthetopcover(see“Replacingthetopcover”onpage144).
Step11.Slidetheserverintotherack.
Step12.Reconnectthepowercordsandanycablesthatyouremoved.
Step13.Turnontheperipheraldevicesandtheserver.
Replacinganadapterinthereartwohard-disk-drivekit
Usethisinformationtoreplaceanadapterinthereartwohard-disk-drivekit.
Toinstallanadapter,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page289
.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables.
Step3.Removetheservertopcover(see“Removingthetopcover”onpage143).
Step4.Removethereartwohard-disk-drivekit(see“Removingthereartwohard-disk-drivekit”on
page200).
Step5.1Slidetheretentionbracket;then,2rotateittotheopenposition.
196LenovoSystemx3650M5InstallationandServiceGuide