Glossary
Meaning of the signal names
2
Guide
2.2
2.2.2
L
2.2-3
EDS82EV903-1.0-11/2002
AOUT2-IN
Analog output 2 in
Input of analog output 2
AOUT2-OFFSET Analog output 2 offset
Offset of analog output 2
AOUT2-OUT Analog output 2 out
Output of analog output 2
DCTRL1 Digital control 1
Function block device control
DCTRL1-C0010...C0011 DCTRL1-output s peed between C0010 and C0011
Status signal:
Output frequency within t he set limits of C0010 and C0011
DCTRL1-CCW DCTRL1-counter-clockwise
Status signal:
CCW rotation
DCTRL1-CCW/QSP DCTRL1-counter-clockwise/quickstop
Activates CCW rotation with quickstop
DCTRL1-CINH DCTRL1-controller inhibit
Controller inhibit
or status signal:
Controller inhibited
DCTRL1-CW/CCW DCTRL1-clockwise/counter-clockwise
CW/CCW rotation changeover
DCTRL1-CW/QSP DCTRL1-clockwise/quickstop
Activates CW rotation with quickstop
DCTRL1-H/RE DCTRL1-hand/remote
Hand control/remote control changeover
DCTRL1-IMOT<ILIM DCTRL1-motor current < current limit
Status signal:
Apparent motor current < current threshold
DCTRL1-(IMOT<ILIM)-QMIN DCTRL1-motor current < current limit and Qmin active
Status signal:
Apparent motor current < values remain under current threshold
and frequenc y threshold Qmin
DCTRL1-(IMOT<ILIM)-RFG-I=O DCTRL1-motor current < current limit and RFG in=out
Status signal:
Apparent motor current < current threshold and ramp-function
generator = ramp-function generator output
DCTRL1-(IMOT>ILIM)-RFG-I=O DCTRL1-motor current > current limit and RFG in=out
Status signal:
Apparent motor current > current threshold and ramp function
generator input = ramp function generator output
DCTRL1-IMP DCTRL1-pulse inhibit
Status signal:
Pulse inhibit
DCTRL1-LP1-WARN DCTRL1-lost phase 1 warning
Warning signal:
Motor phase failure
To Next Page
Loading...
Need help?
General