Glossary
Meaning of the signal names
2
Guide
2.2
2.2.2
L
2.2-5
EDS82EV903-1.0-11/2002
DCTRL1-TRIP-RESET
DCTRL1-TRIP-reset
Fault message reset
DCTRL1-TRIP-SET DCTRL1- external TRIP active
Evaluation of external fault messages
DFIN1 Digital frequency input 1
Function block frequency input 1
DFIN1-GAIN Digital frequency input 1 gain
Gain of frequenc y input 1
DFIN1-NORM Digital frequency input 1 normalisation
Normalisation of frequency input 1
DFIN1-OFFSET Digital frequency input 1 offset
Offset of frequency input 1
DFIN1-ON Digital frequency input 1 on
Activation of frequency input 1
DFIN1-OUT Digital frequency input 1 output
Output of frequency input 1
DFOUT1 Digital frequency output 1
Function block frequency input 1
DFOUT1-AN-IN Analog input of digital frequency output 1
Analog input of frequency output 1
DFOUT1-OUT Digital frequency output 1 output
Output of frequency output 1
DIGIN1 Digital Input 1
Function block digital inputs 1
DIGOUT1 Digital output 1
Function block digital output 1
DIGOUT2 Digital output 2
Function block digital output 2
FIXED-FREE Input or output not connected
Input or output not assigned
MCTRL1 Motor controL 1
Function block motor control 1
MCTRL1-DCB MCTRL1-activation of direct current brake
Activates DC braking
MCTRL1-DCVOLT MCTRL1-DC voltage
DC bus voltage
MCTRL1-Imax MCTRL1-Imax
Status signal:
Maximum current of controller is reached or torque setpoint is
reached
MCTRL1-IMOT MCTRL1 -motor current
Apparent motor current
MCTRL1-MOUT MCTRL1-torque output
Torque delivered (utilisation)
To Next Page
Loading...
Need help?
General