Safety instructions
General safety and application notes
10
Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2 Safety instructions
2.1 General safety and application notes
• Lenze drive and automation components ...
• must only be used as directed.
Application as directed
( 12)
• must never be commissioned if they display signs of damage.
• must never be technically modified.
• must never be commissioned if they are not fully mounted.
• must never be operated without required covers.
• during and after operation can have live, moving and rotating parts, depending on their de-
gree of protection. Surfaces can be hot.
• The following applies to Lenze drive components ...
• only use the accessories approved.
• Only use original manufacturer spare parts.
• Observe all specifications contained in the enclosed documentation and related documentati-
on.
• This is the precondition for safe and trouble-free operation and for obtaining the product fea-
tures specified.
Product features
( 13)
• The specifications, processes, and circuitry described in this document are for guidance only
and must be adapted to your own specific application. Lenze does not take responsibility for
the suitability of the process and circuit proposals.
• All works on and with Lenze drive and automation components must only be carried out by qua-
lified personnel. According to IEC 60364 or CENELEC HD 384 these are persons who ...
• are familiar with installing, mounting, commissioning, and operating the product.
• who have the corresponding qualifications for their work.
• who know and can apply all regulations for the prevention of accidents, directives, and laws
applicable at the place of use.
Note!
It is absolutely vital that the stated safety measures are implemented in order to prevent
serious injury to persons and damage to material assets.
Always keep this documentation to hand in the vicinity of the product during operation.
Danger!
If the following basic safety measures are disregarded, severe injuries to persons and da-
mage to material assets may result.
To Next Page
Loading...
