Lenze E84AYCER - Acyclic Data Transmission Process

Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019 55
Parameter data transfer
The acyclic channel (PROFIdrive profile)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.1.2 Acyclic data transmission process
[9-2] Data communication via the acyclic channel
• A "Write.req" is used to transmit the data set (DB47) in the form of a parameter request to the
I/O device.
• "Write.res" confirms the receipt of the message by the I/O controller.
• The I/O controller requests the response of the I/O device with "Read.req".
• The I/O device responds with a "Read.res (-)" if processing is not yet completed.
• After parameter processing, the parameter request is completed by transmitting the parameter
response in the form of a "Read.res (+)" to the I/O controller.
E94YCER011
:ULWHUHV
ZLWKGDWDSDUDPHWHUUHTXHVW
ZLWKGDWDSDUDPHWHUUHVSRQVH
ZLWKRXWGDWD
ZLWKRXWGDWD
ZLWKRXWGDWD
ZLWKRXWGDWD
5HDGUHT
5HDGUHV
5HDGUHT
5HDGUHV3DUDPHWHUUHVSRQVH
3DUDPHWHUUHTXHVW
3DUDPHWHUUHTXHVW
3DUDPHWHU
SURFHVVLQJ
3DUDPHWHUUHVSRQVH
,2FRQWUROOHU
,2GHYLFH
:ULWHUHT'%