Lenze E84AYCER - Preconfigured and Free PDO Interconnection

Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019 49
Process data transfer
Preconfigured port interconnection of the process data objects (PDO)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.2 Preconfigured port interconnection of the process data objects (PDO)
The preconfigured port interconnection of the process data objects can be activated by setting stan-
dard device code C00007 = "40: MCI".
The function block editor (FB Editor) serves to display the port blocks "LP_MciIn" and "LP_MciOut"
with the preconfigured interconnections:
 Note!
The »Engineer« screenshots shown on the following pages are only examples of the set-
ting sequence and the resulting screens.
The data in the display fields may differ from the ones of your project.