Lenze E84AYCER - Online Connection with Engineer Software

Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019 43
Commissioning
Establishing an online connection via PROFINET with the Lenze »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.5 Establishing an online connection via PROFINET with the Lenze »Engineer«
This functionality is only supported from software version V01.30.05.
For an online connection between the »Engineer« and the inverter, the inverter must have an IP
address (see Setting the IP configuration
( 39)).
 Note!
To ensure perfect operation of cyclic PROFINET communication, online access with the
»Engineer« must be effected via a PROFINET switch.
The PROFINET switch integrated in the communication module can execute cyclic PRO-
FINET communication prior to normal TCP/IP communication. In the case of PROFINET
this is effected via the VLAN identification in the Ethernet frame.