Lenze E84AYCER - Product Features

Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019 13
Product description
Product features
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.3 Product features
• Interface module for the PROFINET IO communication system to the expansion slots of the In-
verter Drives 8400
• The communication module can either be supplied internally by the standard device or exter-
nally by a separate voltage source.
• Support of the I&M0...4 functionality for the identification of the standard device
• Automatic detection of the baud rate 100 Mbps
• A line topology is enabled by the integrated 2-port switch.
• Support of the LLDP protocol for the topology recognition
• Support of the SNMP protocol for diagnostic purposes
• Support of the MRP (Media Redundancy Protocol)
The Inverter Drive 8400 can be integrated into a ring topology as a client node.
• Access to all Lenze parameters
• An online connection via PROFINET can be established using the Lenze »Engineer«.