Error messages
Short overview of the PROFINET error messages
80
Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12 Error messages
[ALinkKeywords]
Error messages
This chapter supplements the error list in the software manual and the »Engineer« online help for
the Inverter Drive 8400 by the error messages of the communication module.
[Search-Keywords]
Error messages
12.1 Short overview of the PROFINET error messages
The following table contains all PROFINET error messages in numerical order of the error number.
Furthermore the preset error response and - if applicable – the parameter for setting the error re-
sponse is specified.
Tip!
If you click on the cross-reference in the first column, you will get a detailed description
(causes and remedies) of the corresponding error message.
Software manual/»Engineer« online help for Inverter Drive 8400
Here you will find general information on diagnostics & fault analysis and on error mes-
sages.
Error no.
[hex]
Subject area
no.
[dec]
Error no.
[dec]
Error text Error type
(Error response)
Adjustable
in
0x01bc3100 444 12544 PROFINET: Exist. connect. to 8400 lost 1: No Response -
0x01bc5531
444 21809 PROFINET: Memory: No access 1: No Response -
0x01bc5532
444 21810 PROFINET: Memory: Read error 1: No Response -
0x01bc5533
444 21811 PROFINET: Memory: Write error 1: No Response -
0x01bc6010
444 24592 PROFINET: Restart by watchdog reset 1: No Response -
0x01bc6011
444 24593 PROFINET: Internal error 1: No Response -
0x01bc6100
444 24832 PROFINET: Internal error 1: No Response -
0x01bc6101
444 24833 PROFINET: Internal error 1: No Response -
0x01bc641f
444 25631 PROFINET: Invalid parameter set 1: No Response -
0x01bc6420
444 25632 PROFINET: Error: Lenze setting loaded 1: No Response -
0x01bc6430
444 25648 PROFINET: Invalid module configuration 1: No Response -
0x01bc6501
444 25857 PROFINET: Record parameter: Invalid read 4: Warning locked -
0x01bc6502
444 25858 PROFINET: Record parameter: Invalid write 4: Warning locked -
0x01bc6503
444 25859 PROFINET: Data output status bad 4: Warning locked -
0x01bc6531
444 25905 PROFINET: Data_Exchange status quit 0: None C13880/1
0x01bc6532 444 25906 PROFINET: Station name error 1: No Response -
0x01bc6533
444 25907 PROFINET: IIP address error 1: No Response -
0x01bc6534
444 25908 PROFINET: Stack init error 1: No Response -
0x01bc6650
444 26192 PROFINET: Internal error 1: No Response -
To Next Page
Loading...
