Lenze E84AYCER - Device and Application-Specific Safety; Residual Hazards

Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019 11
Safety instructions
Device and application-specific safety instructions
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2.2 Device and application-specific safety instructions
• During operation, the communication module must be securely connected to the standard de-
vice.
• Always use a separate power supply unit safely separated according to EN 61800-5-1 ("SELV/
PELV") in every control cabinet for external voltage supply.
• Only use cables corresponding to the given specifications.
Ethernet cable specification
( 30)
2.3 Residual hazards
Protection of persons
• If the Inverter Drives 8400 are operated on a phase-earthed mains with a rated mains voltage
of ≥ 400 V, external measures need to be implemented in order to ensure protection against ac-
cidental contact.
Protective insulation
( 16)
Device protection
• The communication module contains electronic components which may be damaged or de-
stroyed by electrostatic discharge.
Installation
( 22)
 Documentation for the standard device, control system, system/machine
All the other measures prescribed in this documentation must also be implemented. Ob-
serve the safety instructions and application notes contained in this manual.