Lenze L-force 8400 BaseLine D - Communicating with the controller; Going online via diagnostic adapter

8400 BaseLine D | Software Manual
Product description
Communicating with the controller
14 L Firmware 03.00 - DMS EN 5.0 - 07/2009
2.3 Communicating with the controller
The following interface can be used to build up communication between PC and controller:
 Diagnostic interface X6/Going online via diagnostic adapter
2.3.1 Going online via diagnostic adapter
For the initial commissioning of the controller, you can use, for instance, the diagnostic
adapter offered by Lenze:
 Note!
Please observe the documentation for the diagnostic adapter!