8400 BaseLine D | Software Manual
Motor control (MCTRL)
Motor selection
92 L Firmware 03.00 - DMS EN 5.0 - 07/2009
5.2 Motor selection
The motor data must be especially parameterised for the field-oriented control. The motor
data comprises the parameters of the motor nameplate and the data of the equivalent
circuit diagram of the motor.
Overview of the relevant parameters
[5-3] Codes of the motor nameplate
[5-4] Codes of the equivalent circuit diagram of the motor
Parameter INFO
C081
Rated motor power
C087
Rated motor speed
C088
Rated motor current
C089
Rated motor frequency
C090
Rated motor voltage
C091
Motor cos ϕ
Parameter INFO
C084
Data of the equivalent circuit diagram of the motor
C085
Data of the equivalent circuit diagram of the motor
C092
Mutual motor inductance
To Next Page
Loading...