I
NITIAL
C
ONFIGURATION
5-4
4. In the Internet Protocol (TCP/IP) Properties dialog box, click to
select Use the following IP address. Then type your intended IP
address, Subnet mask, and Default gateway in the provided text boxes.
5. Click OK to save the changes.
To change the IP address of a Windows XP PC:
1. Click Start, Control Panel, then Network Connections.
2. For the IP address you want to change, right-click the network
connection icon, and then click Properties.
3. In the list of components used by this connection on General tab,
select Internet Protocol (TCP/IP), and then click the Properties
button.
4. In the Internet Protocol (TCP/IP) Properties dialog box, click to
select Use the following IP address. Then type your intended IP
address, Subnet mask, and Default gateway in the provided text boxes
5. Click OK to save the changes.
Note: For users of systems other than Windows 2000 or Windows XP,
refer to your system documentation for information on changing
the PC’s IP address.
To Next Page
Loading...
