T
OOLS
6-19
Upgrade Firmware
Upgrades the switch system firmware using a file provided by LevelOne.
Select “Upgrade Firmware” from the Tools drop-down list, then click the
“Browse” button to select the firmware file. Click the APPLY button to
upgrade the selected switch firmware file. You can download firmware
files for your switch from the Support section of the LevelOne web site at
www.level1.com.
Web – Click System, Tools, Reset to Factory Defaults.
Figure 6-9 Upgrade Firmware
Upload/Download Configuration
The Upload/Download Configuration feature allows you to save the
switch’s current configuration or restore a previously saved configuration
back to the device. Configuration files can be saved to any location on the
web management station.
Web – Click SYSTEM, Tools, Upload/Download Configuration. To
upload or download the configuration file, select “Upload/Download
Configuration” from the Tools drop-down list, then select “Upload” to
save a configuration or “Download” to restore a configuration. Use the
To Next Page
Loading...
