C
ONFIGURING
VLAN G
ROUPS
6-43
and untagged packets. Any received packets that are untagged are
assigned to the default VLAN. Any tagged packets will be dropped
unless the port is a member of the VLAN identified by the VLAN tag in
the packet. Outgoing packets will be tagged unless the packet’s VLAN
ID is the same as the PVID. PCs should be connected to ports with
Packet Type set to “All.” PCs cannot, in general, send or receive tagged
packets.
If the Packet Type is set to “Tagged Only,” the port will drop untagged
packets and will only receive tagged packets. Tagged packets will be
dropped unless the port is a member of the VLAN identified by the
VLAN tag in the packet.
• PVID – The port VLAN ID (PVID) is associated with untagged, ingress
packets. It is assigned to untagged frames received on the specified
interface. The PVID has no effect on ports that have Packet Type set to
“Tagged Only.” (Default PVID: 1)
It is not possible to remove a port from VLAN 1 unless its PVID has
been changed to something other than 1.
Outgoing packets are tagged unless the packet’s VLAN ID is the same
as the PVID. When the PVID is set to “None,” all outgoing packets are
tagged.
Note: If you select “Tagged Only” mode for a port, we recommend
setting the PVID to “None” as the standard configuration.
To Next Page
Loading...
