Menu item Description
RGB Saturation
0–5
Adjusts saturation in color outputs
Notes:
• 0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
Color Balance
Cyan
-5–5
Magenta
-5–5
Yellow
-5–5
Black
-5–5
Reset Defaults
Adjusts color in printed output by increasing or decreasing the amount of toner
being used for each color
Note: 0 is the factory default setting.
Color Samples
sRGB Display
sRGB Vivid
Display—True Black
Vivid
Off—RGB
US CMYK
Euro CMYK
Vivid CMYK
Off—CMYK
Prints sample pages for each of the RGB and CMYK color conversion tables used
in the printer
Notes:
• Selecting any setting prints the sample.
• Color samples consist of a series of colored boxes along with the RGB or
CMYK combination that creates the color observed. These pages can be
used to help decide which combinations to use to get the desired printed
output.
• From a browser window, type the IP address of the printer to access a
complete list of color sample pages from the Embedded Web Server.
Manual Color
RGB Image
Vivid
sRGB Display
Display—True Black
sRGB Vivid
Off
RGB Text
Vivid
sRGB Display
Display—True Black
sRGB Vivid
Off
RGB Graphics
Vivid
sRGB Display
Display—True Black
sRGB Vivid
Off
Customizes the RGB color conversions
Notes:
• sRGB Display is the factory default setting for RGB Image. This applies a
color conversion table to an output that matches the colors displayed on a
computer monitor.
• sRGB Vivid is the factory default setting for RGB Text and RGB Graphics.
sRGB Vivid applies a color table that increases saturation. This is preferred
for business graphics and text.
• Vivid applies a color conversion table that produces brighter, more saturated
colors.
• Display—True Black applies a color conversion table that uses only black
toner for neutral gray colors.
• Off turns off color conversion.
165
To Next Page
Loading...
Need help?
General
