Enter PIN
Enter the PIN you created in Print Properties when the confidential job was sent for printing.
Enter PIN to lock
Enter the PIN you created to lock the control panel and prevent menu changes.
Error reading USB drive
Remove the device and wait for the message to clear. The USB drive may be corrupted.
Fax failed
The fax failed to be sent. Wait for the message to clear.
Flushing buffer
Wait for the message to clear.
Formatting Disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not power off while the printer is formatting the printer hard disk.
The percentage completed appears on the display.
Formatting Flash DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not power off while the printer is formatting the flash memory.
Incorrect orientation
Change the orientation of the paper in the tray or the position of the paper guides. Make sure the print job is requesting
the correct paper size.
Insert hole punch box
Insert the hole punch box into the finisher. Wait for the message to clear.
Insert Tray <x>
Insert the specified tray into the printer.
Internal System Error, Reload Bookmarks
• Reload the bookmarks.
• Touch Continue to clear the message and continue printing.
Internal System Error, Reload Security Certificates
• Reload the security certificates.
• Touch Continue to clear the message and continue printing.
Invalid Engine Code
You need to download valid engine code for the printer.
For information about downloading code, see the User's Guide on the Software and Documentation CD.
Note: Engine code may be downloaded while this message appears on the display.
192
To Next Page
Loading...
Need help?
General
