5 Click Analog Fax Setup.
6 Click Holding Faxes.
7 Enter a password in the Print Faxes Password box.
8 In the Held Fax Mode box, click one of the following:
• Off
• Always On
• Manual
• Scheduled
9 If you selected Scheduled, continue with the following steps. Otherwise, go to step 10.
a Click Fax Holding Schedule.
b In the action box, click Hold faxes.
c In the time box, click the time you want the held faxes released.
d In the Day(s) box, click the day you want the held faxes released.
10 Click Add.
Forwarding a fax
This option lets you print and forward received faxes to a fax number, e-mail address, FTP site, or LDSS.
1 Open a Web browser.
2 In the address bar, type the IP address of the printer, and then press Enter.
3 Click Configuration.
4 Click Fax Settings.
5 Click Analog Fax Setup.
6 Click inside the Fax Forwarding box, and then select one of the following:
• Print
• Print and Forward
• Forward
7 Click inside the Forward to box, and then select one of the following:
• Fax
• E-mail
• FTP
• LDSS
8 Click inside the Forward to Shortcut box, and then enter the shortcut number where you want the fax forwarded.
Note: The shortcut number must be a valid shortcut number for the setting that was selected in the “Forward
to” box.
9 Click Submit.
90
To Next Page
Loading...
Need help?
General
