Control panel item Description
6
Start
• Press to initiate the current job indicated on the display.
• From the home screen, press to start a copy job with the default settings.
• If pressed while a job is scanning, the button has no effect.
7
Stop Stops all printer activity
A list of options is offered once Stopped appears on the display.
8
Back
In the Copy menu, press to delete the right-most digit of the value in the Copy Count.
The default value of 1 appears if the entire number is deleted by pressing
numerous
times.
In the Fax Destination List, press
to delete the right-most digit of a number entered
manually. You can also press
to delete an entire shortcut entry. Once an entire line is
deleted, another press of
causes the cursor to move up one line.
In the E-mail Destination List, press
to delete the character to the left of the cursor. If
the character is in a shortcut, the shortcut is deleted.
Understanding the home screen
After the printer is turned on and a short warm-up period occurs, the display shows the following basic screen which
is referred to as the home screen. Use the home screen buttons to initiate an action such as copying, faxing, or
scanning; to open the menu screen; or to respond to messages.
Display item Description
1
Copy Access the Copy menus.
Note: If the home screen is shown, you can also access the Copy menus by pressing
a number on the keypad.
2
E-mail Access the E-mail menus.
3
Menus Access the menus. These menus are available only when the printer is in the Ready
state.
20
To Next Page
Loading...
Need help?
General
