Follow these guidelines to avoid personal injury or printer damage:
• Use two people to roll the printer.
• Use two people to roll the scanner while it is on its scanner shelf.
• Before moving the printer:
– Turn off the printer using the power switch, and then unplug the power cord from the wall outlet.
– Disconnect all cords the cables from the printer.
– Disconnect the connector bracket.
– Remove all printer options.
Warning: Damage to the printer caused by improper moving is not covered by the printer warranty.
Moving the printer and options to another location within the office
The printer and options can be safely moved to another location by following these precautions:
• Keep the printer in an upright position.
• Move the printer using a cart that has a surface able to support the full footprint of the printer. Move the options
using a cart that has a surface able to support the dimensions of the options.
• Avoid severe jarring movements that may cause damage to the printer and options.
Disassemble the printer, scanner, and scanner shelf before moving items on any cart. For more information, see
“Disassembling the printer from the scanner shelf prior to the move” on page 221.
Disassembling the printer from the scanner shelf prior to the move
1 Turn the printer off.
221
To Next Page
Loading...
Need help?
General
