Check the paper
Avoid textured paper with rough finishes.
Check the Paper Type setting
Make sure the Paper Type setting matches the paper loaded in the tray.
Make sure Color Saver is set to Off
Color Saver may be set to On.
Is the toner low?
When 88 <color> toner low appears order a new cartridge.
A toner cartridge may be defective
Replace the toner cartridge.
Print is too dark
Check the darkness, brightness, and contrast settings
The Toner Darkness setting is too dark, the RGB Brightness setting is too dark, or the RGB Contrast setting is too
high.
• From Print Properties, change these settings.
Note: This solution applies to Windows users only.
• From the Quality menu, change these settings.
Is the toner cartridge defective?
Replace the toner cartridge.
Solid color pages
The printer may need to be serviced. For more information, contact Customer Support.
250
To Next Page
Loading...
Need help?
General
