Menu item Description
Month
January
February
March
April
May
June
July
August
September
October
November
December
Specifies the month
Day
0–31
Specifies the day
Hour
0–23
Specifies the hour
Minute
0–59
Specifies the minute
DST Mode
Automatic
Manual
Accommodates Daylight Savings Time changes
Notes:
• Automatic is the factory default setting. The time is set by the server.
• Manual allows manual time changes.
Daylight Savings
Yes
No
Specifies whether Daylight Savings time is applicable
Time Server
IP
None
Specifies the time server IP address
Note: The time server must be set to None to allow permanent manual time
and date changes.
Time Server Name
<none>
Specifies the IP address of the time server
Allow NTP Broadcast
On
Off
Allows the synchronization of time among a set of distributed time servers and
clients
Note: Off is the factory default setting.
Network/Ports menu
TCP/IP menu
Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
180
To Next Page
Loading...
Need help?
General
