Lexmark C522 - Configuration Menu (CONFIG MENU); Available Tests

3-20 Service Manual
5022-xxx
Configuration menu (CONFIG MENU)
Available tests
The tests display on the operator panel in the order shown for models C53x. The order differs slightly in models
C52x.
Configuration menu
Reset Fuser Cnt See “Reset Fuser Cnt” on page 3-21.
Color Lock Out
(For models C52x: Black Only Mode)
See “Color Lock Out” on page 3-21.
Prt Quality Pgs See “Prt Quality Pgs” on page 3-21.
Color Trapping See “Color Trapping” on page 3-21.
SIZE SENSING See “Size Sensing” on page 3-22.
Panel Menus See “Panel Menus” on page 3-22.
PPDS Emulation See “PPDS Emulation” on page 3-22.
Download Emuls See “Download Emuls” on page 3-22.
Demo Mode See “Demo Mode” on page 3-22.
Factory Defaults See “Factory Defaults” on page 3-22.
Energy Conserve See “Energy Conserve” on page 3-23.
EVENT LOG See “Event Log” on page 3-23.
Auto Align Adj See “Auto Align Adj” on page 3-23.
Auto Color Adj See “Auto Color Adj” on page 3-23.
Enforce Color Order See “Enforce Color Order” on page 3-24.
Color Alignment See “Color Alignment” on page 3-24.
Motor Calibration See “Motor Calibration” on page 3-24.
Paper Prompts See “Paper Prompts” on page 3-24.
Env Prompts See “Env Prompts” on page 3-25.
Jobs on Disk (if hard disk is installed) See “Jobs on Disk” on page 3-25.
Disk Encryption (if hard disk is
installed)
See “Disk Encryption” on page 3-25.
Duplex Gloss See “Duplex Gloss” on page 3-25.
Font Sharpening See “Font Sharpening” on page 3-26.
Exit Config Menu This selection exits Configuration Menu, and Resetting the
Printer displays. The printer performs a POR and returns to normal
mode.